Tungsten carbide drill Ø 35 mm. Ruby

Tungsten carbide bits are the easiest and most economical option for drilling holes in tiles.
With the tungsten carbide bits, the head with centering bit (ref. 04992) and an electric drill without a hammer, the setter will be able to make the most common and necessary holes in any tile covering without the need to make visible cuts.
The tungsten carbide drill bits always work on the unglazed side of the tile and, thanks to the centering bit of the head, it is not necessary to use any guide. The drills They are dry cut, but it is recommended to slightly moisten the tile to reduce the generation of dust during drilling.
The average life of tungsten carbide drills is 100 holes and ALWAYS depends on the type of tile, its thickness and the correct cooling and use.
The drilling depth of tungsten carbide bits is 18mm.
Before making a new drilling we must make sure that the drill is clean and free of any obstruction or other material.
The maximum operating speed for tungsten carbide drills is 800 rpm
For a longer duration of the drill it is important to respect the proper turning speed and to exert moderate pressure while drilling. To obtain the best finishes, it is recommended not to completely perforate the tile and break the core from the glazed part.
This range of products, like the rest of the ranges in our catalog, is designed to offer the user time savings and increase efficiency in their work. At Rubí we know the importance of efficiency and time saving today, therefore, our product development managers are very focused on these concepts when designing new tools.
https://www.rubi.com/es/brocas-de-carburo-de-tungsteno-r206