EASYGRES drill Ø 6 mm. Ruby

For drilling all types of ceramic tiles, especially porcelain tiles, and other cladding materials such as marble and granite, Rubí has ​​the EASYGRES range of diamond drill bits.
The EASYGRES range are wet-cut, electroplated diamond bits suitable for use with an electric drill without a hammer.
The quality of the diamond used in the design and manufacture of the EASYGRES bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass.
The EASYGRES drill bits, with diameters Ø 6 to 12 mm, are perfect for placing bathroom accessories or any type of decoration accessory on ceramic surfaces, and should always be used cooled with water and with the EASYGRES guide, which allows centering and adequate cooling, ensuring great precision and the best finishes.
The rest of the diameters of the EASYGRES range of diamond bits, from Ø 20 to 120 mm, have been designed mainly so that the ceramic tile setter can obtain the best results when making the necessary holes for taking holes. water, drains, electricity points, etc.
The half-life of EASYGRES bits varies by diameter. For EASYGRES from Ø 6 to 12 mm the half life is 10 holes and for EASYGRES from Ø 20 to 120 mm the half life is 25 holes. The average life of the drills ALWAYS depends on the type of material, its thickness and the correct cooling and use.
The drilling depth of the EASYGRES bits is 25 mm.
EASYGRES bits have a side opening that improves the cooling of the bit and facilitates the removal of solid waste after each hole. Before making a new drilling, we must make sure that the bit is clean and free of any obstruction.
The recommended speed of use for EASYGRES drills is between 400 and 1000 rpm, depending on the material to be drilled.
For a better finish and longer life of the drill, it is important to respect the correct turning speed and apply moderate pressure while drilling.
https://www.rubi.com/es/brocas-diamante-easygres-r195