EASYGRES Ø 6 mm drill kit. Ruby

EASYGRES drill kits are the most economical solution for those users who need to drill holes of different diameters in all types of ceramic tile.
EASYGRES are electroplated, wet-cut diamond bits suitable for use with an electric drill without a hammer.
The quality of the diamond used in the design and manufacture of the EASYGRES bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass.
Rubí offers the construction professional different product kits, with configurations adapted to the most common situations.
For the smallest diameters (from Ø 6 to 12 mm), Rubí offers a practical EASYGRES kit consisting of one or more drills (depending on the model), the practical EASYGRES guide, the corresponding centering sleeves (depending on the number of drills contained in the kit) and fixing adhesives.
The EASYGRES guide allows holes to be drilled in both the floor and the wall, thanks to the functional design of its water tank that incorporates a flow regulating tap. The guide easily adheres to any surface, thanks to its renewable adhesive system.
In addition to these practical kits, Rubí also offers the EASYGRES PLUS kit consisting of 7 EASYGRES drills (Ø 20, 28, 35, 43, 50, 68 and 75 mm), a MULTIDRILL centering guide, a tank and hose assembly, and a practical suitcase case.
Finally, and thinking about the most common use of this type of drill bit, there is the EASYGRES Ø 35 mm kit. This kit offers the possibility of acquiring the most commonly used drill diameter (Ø35 mm) together with all the necessary accessories: MULTIDRILL guide and tank set with hose.
The half-life of EASYGRES drills varies according to the diameter: for EASYGRES from Ø 6 to 12 mm the half-life is 10 holes and for EASYGRES from Ø 20 to 120 mm the half-life is 25 holes. The average life of the drills ALWAYS depends on the type of material, its thickness and the correct cooling and use.
The drilling depth of the EASYGRES bits is 25 mm.
EASYGRES drill bits have a side opening that improves the cooling of the drill bit and makes it easier for us to remove solid waste after each hole. Before making a new perforation we must make sure that the drill is clean and free of any obstruction.
The recommended speed of use for EASYGRES drills is between 400 and 1000 rpm, depending on the material to be drilled.
For a better finish and longer life of the bit, it is important to respect the proper turning speed and apply moderate pressure while drilling.
https://www.rubi.com/es/kit-brocas-diamante-easygres-r196