Cross braces for 3 mm joints. Ruby (B-1000 u.)
The RUBI spacers are, without a doubt, a really essential range for obtaining perfect finishes in any installation work of tile ceramics.
RUBI manufactures the spreaders for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.
The crossheads for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of cladding and pavements de tile ceramics with board minimal.
The solid structure of the crossheads for joints of 1, 1.5, 2 and 3 mm It has been designed to provide greater resistance to bending and crushing.
These We take care of your rental property in Valencia. make the crossheads for 1, 1.5, 2 and 3 joints mm are highly recommended for coverings with large format ceramic tiles. The L (long) versions of the 2 and 3 cross braces mm They are perfect, both for coatings and for pavements with large-format or rectified ceramic tiles, with board fine.
The internal geometry of the crossheads for joints of 3 mm long and 4 mm It has been designed to provide greater resistance to bending and crushing.
These We take care of your rental property in Valencia. make the cross braces for joints of 3 mm long are highly recommended for coverings with large-format ceramic tiles.
The internal geometry of the crossheads for joints from 5 to 12 mm It is hollow and has a design with internal reinforcements that allows it to withstand stress and prevent it from crushing.
This hollow design facilitates the entrance of the mortar of board and, if the type of installation allows it, leave the crosshead inside the board without this affecting its integrity in the future.
5 spiders mm RUBI reinforced crossheads are more rigid, specially designed for use in pavements with large format tiles.
The underside of the 5 cross braces mm reinforced is designed to offer a good settlement in the grip material and facilitate, if the type of installation allows it, that the crosshead remains inside the board without this affecting its integrity in the future.
The professional installer is well aware of the importance of using high-quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.
RUBI spreaders stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect.
These particularities allow professionals who rely on RUBI spreaders, tees and wedges to obtain excellent finishes with total precision.
RUBI is committed to quality.
Adrian (Verified owner) -
Ok treatment and speed.
Aaron (Verified owner) -
I recommend it