Manual ceramic and tile cutter RUBÍ TX-710 MAX

Manual ceramic and tile cutter RUBÍ TX-710 MAX

High robustness.

High separation power (1.200 kg) - MASTER POWER.

One hand operable. Extra-long aluminum slide head with “self-lubricating” friction bushings.

Mobile separator with aluminum clamp, equipped with plastic protector to AVOID marking on the most DELICATE surfaces.

The clamping of the plunger, by means of a ratchet mechanism, and the unlocking, by a trigger, allows scratching and separating with just one hand.

Higher SPEED of use. Increases PERFORMANCE in both thin and thick materials.

Better VISIBILITY of the scratching and cutting area. Aluminum injection base, reinforced by a central rib, for greater ROBUSTNESS.

Galvanized steel floating tables, increases the STABILITY in the cut.

Swivel bracket, central pivot.

Greater PRECISION in angular cuts.

With lateral stop for repetitive cuts and narrow strips.

Equipped with 2 supplementary arms *, for large format ceramics. (* 4 in the TX-1250 MAX model).

Handle with soft grip grip for greater ERGONOMICS and COMFORT.

Equipped with 8 mm and 22 mm EXTREME scoring wheels.

Compatible with the entire range of PLUS scoring wheels.

Includes suitcase-case.

Tubular steel guides Ø30 mm x 2 mm wall thickness.

The TX-MAX range of professional manual cutters are perfect for INTENSIVE cutting of all types of ceramic tiles.

Thanks to its high-performance MULTIPOINT separator and its rotary angle system, the TX-MAX models allow an easy and fast execution of angular cuts (from 0º to 45º), especially in porcelain stoneware tiles (AIa / BIa).

Its great separation power (up to 1200 kg) allows the TX-MAX cutters to have an excellent behavior with extruded stoneware.

The 30 mm diameter tubular steel guides and the extra-long aluminum sliding head provide impressive structural strength, making the most of the models with the highest cutting capacity (TX-1020 MAX and TX-1250 MAX).

The advanced position of the roller increases visibility during scratching and separation, and the clamp incorporates a removable protector that allows working on the most delicate surfaces without the risk of leaving marks.

The separator mechanism allows one-handed use, facilitating the locking and unlocking of the hold-down by means of a ratchet and trigger system.

This system increases work performance, both in low-thickness materials and in those of greater thickness (from 3 to 21 mm without the protector, and up to 19 with the anti-mark protector included in the clamp).

As a complement to the floating table system, the 710 and 1020 models are equipped with two additional side arms, to increase the support surface with large-format tiles.

The 1250 model has 4 arms (two on each side).

All models in the TX-MAX range include a side stop for measurement and blocking of repetitive narrow cuts and strips, as well as two scoring wheels (8 mm and 22 mm EXTREME) and the traditional carrying case.

The manual cutters TX-MAX are compatible with the entire range of Rubí PLUS scoring wheels.

The TX-1250 MAX model includes, in addition to the suitcase, handle and wheels to facilitate its portability in the workplace.

* There are some ceramic materials, with thicknesses greater than 15 mm, which due to their physical characteristics, possible internal stresses or finishes, present difficulties to be cut manually.

It is recommended to perform some sample cuts to determine the compatibility of the product.