TP-66-T manual cutter

Optimal separation for each thickness.

Swivel square with central pivot for quick and accurate measurement of angular cuts.

Long lasting laser engraved ruler. Center pivot swivel square for fast and accurate measurement angular cuts.

Reinforced pisador.

Side stop for precision repetitive cutting.

Two-layer base with damping effect.

Base supplement for large formats. Carrying handle. (TP-66-TY TP-75-T).

Design of the set for use by pulling the handle. RubíFLEX bi-material handle.

Ergonomics and high resistance. Cutting thickness regulation system with 3 positions (6-9 mm./9-12 mm./12-20 mm.) *, Fast and precise. Ø 22mm roller included (Ref. 18914)

These manual cutters are designed to perform intensive work with any type of ceramic tile.

TP-T manual cutters are ideal for cutting porcelain stoneware tiles (type BIa).

They incorporate a single guide system, highly resistant to impacts, which gives them a very long useful life.

The ergonomic handle of the TP-T manual cutters is adapted for a work system by pulling the handle and incorporates a height-adjustable spacer, which allows you to work with ceramic tiles with thicknesses * from 5 to 20 mm, with a separation power of 1.000 kg.

The TP manual cutters are very easy to use and offer the professional installer a higher working speed.

In addition, the mobile separator of the TP-T manual cutters ensures high quality in diagonal and angular cuts.

All models in the TP-T range of manual cutters feature a central pivot swivel square for quick and accurate measurement of angle cuts. Thanks to the lateral stop, the ceramic tile setter can make repetitive cuts in a very simple way and always with maximum precision.

Our manual cutters TP-T by Rubí have a high-strength aluminum base with a bilayer system with a damping effect on springs, and a lateral support for large-format tiles.

Unlike the TP-S ceramic cutter, with this one we will work in a different position, behind the machine and pulling the handle towards us.

The TP-T ceramic cutters work with a 22 mm wheel, made of long-lasting tungsten carbide. This allows us to adapt to each material with a very versatile and efficient wheel diameter. All these characteristics make these manual cutters very easy to use, as well as durable and light.

TP-T manual cutters do not require great care or need maintenance, as the guide does not require lubrication. * There are some ceramic materials, with thicknesses greater than 15 mm, which, due to their physical characteristics, possible internal stresses or finishes, present difficulties to be cut manually.

It is recommended to perform some sample cuts to determine the compatibility of the product.