The main function of the RUBI DELTA LS leveling system is to avoid the creation of placement tabs during the installation of ceramic tiles, both on floors and on walls.
The DELTA LS leveling system also prevents the movement of the tiles during the setting of the adhesive and, during installation, the number of corrections in the position of the ceramic tile itself is reduced.
The basic principle of the DELTA LS leveling system is to press the highest piece, until it matches its position with the adjacent tiles, thus obtaining a substantial improvement in surface flatness.
The RUBI DELTA LS leveling system is a wedge and flange system, recommended for formats of 30 × 30 cm or larger and varied thicknesses of up to 12, 15 or 20 mm, depending on the flange model used.
Using the RUBI DELTA LS leveling system is quick, easy and intuitive. Once the installation is finished, the elements of the system are removed by impact (kick or hammer), always hitting the flanges in the direction of the joint.
The DELTA LS leveling system wedges can be reused multiple times.
The RUBI DELTA LEVEL SYSTEM pliers are designed to be used for both horizontal (flooring) and vertical (wall covering) ceramic tile installation work. The main function of the pliers of the RUBI DELTA LS leveling system is to give the wedge the pressure necessary to allow the ceramic tile to level; thus obtaining a homogeneous resulting flatness.