Crossheads for 4 mm joints. "Reinforced" (Bag 1000 units)
Cross for coatings.
Crosshead for pavements with fine joint.
Crosshead for large-format and rectified ceramics.
Redesigned internal geometry.
Greater resistance to bending and crushing. Ideal for vertical cladding with large formats.
Cross for pavements.
Ideal for large formats.
Hollow structure with internal reinforcements.
Withstands stresses and allows entry of gripping material.
More rigid crosshead, specially designed for use on large-format tile coverings.
Quality base material, without impurities or imperfections.
Bottom face designed for a good settlement in the grip material.
Crosshead for rustic or industrial floors. Cross for large and rustic format.
Rubí spacers form, without any doubt, a truly indispensable range for obtaining perfect finishes in any ceramic tile installation job.
Rubí manufactures the spreaders for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.
The spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with a minimum joint.
The solid structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing.
These properties make the 1, 1.5, 2 and 3 mm joint spacers highly recommended for covering large-format ceramic tiles.
The L (long) versions of the 2 and 3 mm spacers are perfect for both wall and floor tiles with large-format or rectified ceramic tiles, with a fine joint. The internal geometry of the crossheads for 3 mm long and 4 mm joints has been designed to provide greater resistance to bending and crushing.
These properties make the 3 mm long joint spacers highly recommended for large-format ceramic tile cladding. The internal geometry of the cross braces for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing.
This hollow design facilitates the entry of the joint mortar and, if the type of installation allows it, leaving the crosshead inside the installation joint without this affecting its integrity in the future.
Rubí's reinforced 5 mm crosspieces are more rigid crosspieces, specially designed for use on pavements with large-format tiles.
The underside of the reinforced 5 mm crossbars is designed to offer a good seating in the bonding material and to facilitate, if the type of installation allows it, that the crosshead remains inside the installation joint without this being able to affect its integrity in the future.
The professional installer is well aware of the importance of using high-quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.
Rubí spreaders stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect.
These particularities allow professionals who rely on Rubí crossheads, T and wedges to obtain excellent finishes and with total precision. Rubí and toolsbazarot.com are committed to quality.
All our products and tools are subjected to rigorous quality tests by experienced professionals.
We want all the products we have on the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to professionals in the installation of ceramic tiles and construction.
https://www.rubi.com/es/crucetas-para-juntas-r730
Ratings
Not yet reviewed