Crossheads for 4 mm joints. "Reinforced" (B-200 u.)
2,62 € VAT not included
Crosshead for pavements with fine joint.
Greater resistance to bending and crushing. Ideal for vertical cladding with large formats.
More rigid crosshead, specially designed for use on large-format tile coverings.

The Rubí spreaders do not present any type of imperfections or burrs. The spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with a minimum joint. The solid structure of the 1, 1.5, 2 and 3 mm joint spacers has been designed to provide greater resistance to bending and crushing. These properties make 1, 1.5, 2 and 3 mm joint spacers highly recommended for large-format ceramic tile coverings. The L (long) versions of the 2 and 3 mm spacers are perfect, both for wall tiles and for floors with large-format or rectified ceramic tiles, with fine joints. The internal geometry of the 3 mm long and 4 mm joint spacers has been designed to provide greater resistance to bending and crushing. These properties make 3mm long joint spacers highly recommended for large-format ceramic tile coverings. The internal geometry of the spreaders for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and avoid crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows it, to leave the crosshead inside the installation joint without this affecting its integrity in the future. Rubí's reinforced 5 mm spacers are more rigid spacers, specially designed for use on pavements with large-format tiles. The underside of the reinforced 5 mm spacers is designed to offer a good seating in the bonding material and to facilitate, if the type of installation allows it, that the spider remains inside the installation joint without this being able to affect its integrity in the future. The professional installer is well aware of the importance of using high quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities. Rubí spreaders stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who rely on Rubí spreaders, tees and wedges to obtain excellent finishes with total precision.
Only registered users who have purchased this product may make a review.
Ratings
Not yet reviewed