Kit DELTA LEVELING SYSTEM RUBÍ Flange 2 mm
It ensures the flatness and regularity of the laying surface. The kit consists of 1 pliers, 100 cable ties and 100 reusable wedges.
Packed in a practical cube.
Different models available: Flange 1 mm / 1,5 mm and 2 mm.
For tiles from 3 to 12 mm. 3 mm flange for tiles from 6 to 15 mm.
Flange of 1,5 mm and 2 mm. For tiles from 11 to 20 mm.
Manufactured in PP.
Made of steel with ergonomic plastic handles.
6 height adjustment positions according to the thickness of the ceramic tile.
Protective cover on the clamp to avoid damaging the tile.
The main function of the RUBI DELTA LS leveling system is to avoid the creation of placement tabs during the installation of ceramic tiles, both on floors and on walls.
The DELTA LS leveling system also prevents the movement of the tiles during the setting of the adhesive and, during installation, the number of corrections in the position of the ceramic tile itself is reduced.
The basic principle of the DELTA LS leveling system is to press the highest piece, until it matches its position with the adjacent tiles, thus obtaining a substantial improvement in surface flatness.
The RUBI DELTA LS leveling system is a wedge and flange system, recommended for formats of 30 × 30 cm or larger and varied thicknesses of up to 12, 15 or 20 mm, depending on the flange model used.
Using the RUBI DELTA LS leveling system is quick, easy and intuitive.
Once the installation is finished, the elements of the system are removed by impact (kick or hammer), always hitting the flanges in the direction of the joint.
The DELTA LS leveling system wedges can be reused multiple times.
The RUBI DELTA LEVEL SYSTEM pliers are designed to be used in both horizontal (flooring) and vertical (wall covering) ceramic tile installation work.
The main function of the pliers of the RUBI DELTA LS leveling system is to give the wedge the pressure necessary to allow the leveling of the ceramic tile; thus obtaining a homogeneous resulting flatness.