Tee for joints 2 mm. (B-300 u.)
2,30 € VAT not included
Ideal for “joint-breaker” and perimeter placement. Quality base material, without impurities or imperfections. Hollow structure with internal reinforcements. It withstands tension and allows the grip material to enter.
Rubí joint tees form an indispensable range with perfect finishes in any ceramic tile installation job to joint breaker.
Rubí manufactures the T for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.
The T for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with a minimum joint.
The solid structure of the T for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing.
These properties make the T for joints of 1, 1.5, 2 and 3 mm highly recommended for coverings with large-format ceramic tiles.
The internal geometry of the 5mm joint tee has been designed to provide greater resistance to bending and crushing.
The internal geometry of the Tees for joints from 7 to 10 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and avoid crushing.
This hollow design facilitates the entry of the joint mortar and, if the type of installation allows it, to leave the tee inside the installation joint without this affecting its integrity in the future.
The professional installer is well aware of the importance of using high-quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.
Rubí joint tee stands out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who rely on Rubí joint tees to obtain excellent finishes with total precision.
Only registered users who have purchased this product may make a review.
Ratings
Not yet reviewed